weBoost Office 100 - Yagi/Panel (50 Ohm) | 475060R (Certified Refurbished)

The weBoost 475060 Office 100 is our entry-level professional signal booster configured for maximum performance. This kit pairs a Yagi directional outside antenna with a panel inside antenna, giving you the strongest signal capture and the most focused indoor coverage available with the Office 100 platform.

The directional antenna combination makes this the right choice when you know where your nearest cell tower is and want to squeeze every last dB of performance out of the system. Because both antennas focus their energy in one direction instead of all directions, you'll get noticeably more coverage area than an omni/dome configuration.

This certified refurbished unit has been inspected, tested, and restored to like-new condition by the manufacturer. You get the same Office 100 performance at a lower price point, backed by a 1-year warranty.

Please Note: This is a 50 Ohm system with N-connectors. Please see the weBoost Office 100 Signal Booster - Omni/Dome (75 Ohm) | 473060R (Certified Refurbished) if you need a system with F-connectors.

Your Antennas

Outside: Yagi Directional Antenna

The Yagi directional antenna is the outdoor antenna option that can handle the majority of the situations that require a cell phone signal booster. It is directional, which means that it needs to be aimed towards the cell towers of the carrier(s) that you're trying to boost. Our guide on how to aim a directional antenna will walk you through the steps to do that.

The Yagi directional antenna has 10 dB of gain and can cover about 75 degrees of the horizon in one direction, so any carrier towers that fall within that area will be boosted. The Yagi antenna is not going to be a good option for scenarios where there are large hills, mountains, valleys or canyon walls that prevent line of sight to the cell tower.

Since a directional antenna can only cover a portion of the horizon, you may only be able to boost the carrier(s) with towers in the direction that the Yagi antenna is pointing. The advantage is that because they are aimed, they're much more powerful so you'll get more coverage area inside of the building.

Inside: Panel Antenna

Panel antennas are a type of directional indoor antenna. They can be mounted to a wall or to a ceiling. The signal comes out the front of the antenna so it must be mounted in a place where it is aimed at the area where you need coverage. A short pigtail cable comes out of the bottom of the antenna, so you do not need access behind a wall or ceiling to install a panel antenna.

In multi-story homes, panel antennas can be located in the attic pointing down to cover the floors below without any part of the system being visible.

The panel antenna has an average gain of 7 dBi on the low frequencies and 10 dBi on the high frequencies. This makes it more powerful than the dome antennas, but that is because it is a directional antenna, so it sends all of its signal in one direction instead of all directions.

Coverage Area

Many variables impact the total coverage area of a signal booster system. The following are estimates only and may not be accurate in any individual situation.

• If you have an existing strong 5-bar outside signal, you may get up to 15,000 sq ft of coverage inside*
• If you have an existing 3 to 4-bar (-90 dB) outside signal, you may get up to 5,000 sq ft of coverage inside*
• If you have an existing 1 to 2-bar (-100 dB) outside signal, you may get up to 2,000 sq ft of coverage inside*

* The actual coverage area of a signal booster is dependent on many factors including existing outside signal strength, obstructions between you and the cell tower, the materials used in your home or office, the layout of the area you need to cover with a boosted signal, and other factors. The approximate coverage areas listed above are estimates. Actual coverage area will vary based on these and other factors. If you're not sure if a system will be powerful enough for your needs, contact us to find out.

Supported Carriers

The weBoost Office 100 supports virtually all of the networks and carriers in the United States and Canada. For other locations, please consult the frequencies listed below to see if this product will work for you.

Here is a more detailed breakdown of the carriers, networks and frequencies boosted by this kit:

• AT&T 2G, 3G, 4G HSPA+, 4G LTE & 5G
• Verizon 2G, 3G, 4G LTE & 5G
• T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
• US Cellular 2G, 3G & 4G LTE
• All other carriers using 700 MHz, 800 MHz, 1900 MHz, and AWS 1700/2100 MHz frequencies

Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.

In the Box

• weBoost Office 100 Amplifier with Power Supply
• Wilson Yagi Directional Outside Antenna
• Wilson Panel Inside Antenna
• 75 ft of 400 Series Cable for Outside Antenna Run
• 60 ft of 400 Series Cable for Inside Antenna Run
• Lightning Protector with 2 ft Cable

Need Help?

If you're not sure what's best for your situation, give us a call and one of our signal booster experts would be happy to recommend a solution for you.